A hard reboot is performed on the printer to fix printer you will not print from the computer. Look at the ink cartridges and make sure they are installed correctly. Check the connection network / USB. If you are connected to a network, don’t use USB. Drivers and firmware update.
My printer will not print, copy, scan from computer
- Check Network connection status on printer and computer.
- Make sure both devices are connected to the same network.
- Make sure you unlock the USB cord when you connect wireless.
- Uninstall and re-install the printer driver in the latest version.
- Check whether the ink cartridges are complete and properly installed.
- Review and change the print settings accordingly.
- Check for firmware updates and proceed if one is available.
- To print and copy your documents, use a proper application.
Steps To Do The Printer Print From the Computer
USB PROBLEMS
Fix Printer will not print from the computer. At least a minute wait. Wait. Connect the cable back to another USB port. If your computer or laptop has a USB 3.0 slot, plug the cable rectangle into the slot. It is best to use a USB 3.0 cable for quick data transmission.
If other USB connected devices are not in use, remove them from the laptop. Enter a command and add the printer to the current Mac or Windows printer queue. If USB settings are overlapped, the current printer driver should be uninstalled. Reboot your computer and reinstall the driver by the Apple Software Update or Windows Update.
WIRELESS PROBLEMS
Check that the printer is connected to an active and continuous Internet connection at an accurate access point. The wireless network frequency should not exceed 5.0 GHz. To check the network connection, IP address and signal strength, always print an information page from the printer.
Get your computer’s latest version of the HP Print and Scan Doctor tool to fix wireless issues and your imprimer will not print from your computer. Click the Fix Print option on the Start screen of the tool and then select the printer you wish to troubleshoot. Go with the prompts on the screen to solve connection issues. You can also try to default your printer to print.
RESET THE PRINT ENVIRONMENT
Wait a minute or until the printer turns idle before the next step is taken. Detach the USB connector at the back of the printer from the USB port. Leave the printer connected to a network or a USB source. Unlock and open the access door for cartridges; wait until the carriage turns passive. If you remove the ink cartridge from the printer, keep the printer on and disconnect the electric cord from the power port of the printer and the wall outlet.
After about a minute, plug the cable back into the power source. Attach the other end of the cord to the power port. Wait until the printer automatically switches on and, if it fails, press the power button for a long time. Once powered, the printer is warmed up with the lights blinking continuously on the access panel. When the process is complete, reinsert the tin cartridges into the tin slots and close the access door of the cartridge and resolve the printer will not be printed from the computer.