HP 2840 prints blank pages or yellow only

by Printer Expert

HP 2840 prints blank or yellow pages only When the printer presses, instead of printing a printed page, it prints a blank page. The common problems with the printer are described in the user manual. For assistance in HP 2840 prints, you can also call us to the toll-free number for either blank or yellow troubleshooting.

HP 2840 Solution Prints Blank And Yellow Pages

  1. Using authentic printer models compatible.
  2. Insert single sheets in the input tray.
  3. Tap the Setup icon on the control panel in the bottom left corner of the printer.
  4. Select the Tools option. Click OK. Click OK.
  5. Click the Levels Estimated option. Consider OK.
  6. Deinstall and reinstall in their slots the ink cartridges.
  7. Align the ink cartridges so that high quality prints can be made.
  8. Use the manufacturer’s automated tool to clean the printhead.

HP Laserjet 2840 Printer Blank And Yellow Ink How To Resolve

Replace the empty ink cartridges: switch on the printer and use plain white paper to load the printer. Grasp the handle and raise the door of the tin cartridge into space. Lift the inks and gently push the lid back to release the inks to fix blank or yellow pages of HP 2840 prints only.

Push the ink cartridge off the slot to clear it. Take one of the new ink cartons and carefully hold out plastic band from the ink cartons.

Glide the ink cartridge in the slot and close the ink cartridge lid. Close the entrance door to the ink cartridge.

Clean the ink nozzle area manually: Shake the printer and remove the ink cartridge from its slot. Place on its sides the ink cartridges.

Humidify a foam-or lint-free pulp with distilled water and suck out excess water. Wash the sides and face with the swab around the ink cartridge. Allow the ink cartridge to sit 10 minutes or dry it with a fresh swab.

Print the Diagnostic Report on Print Quality: Swipe it to the left of the Printer Control Panel and click the Setup button. Click the display devices and click the Performance Report. Click. Prints a print quality diagnostic study.

Examine defect color chains. If one of the color blocks has no white lines, they will not be blurred.

When one color block shows white lines, they are fading.

Go through the Print Quality Diagnostic report alignment lines and green color block.

Test whether the lines are straight and connected and there are no dark lines or white gaps in the blocks of green color, you can solve the HP 2840 prints problem by using this guide.

You may also like

Leave a Comment

Disclaimer: printerssetup.org is an independent website for providing you with information regarding HP printers. This site doesn’t have specific association with “HP” and its services. All the information and images used in this website are for informational purpose only. We do not sell products or services of HP in any form. We do not provide any warranty or services associated with manufacturer. You should approach the manufacturer for the same.