The canon printer configuration starts with printing the printer out of the package and finishes with the installation of the driver. Be sure to follow the measures below closely to finish the configuration with how to set up a canon printer manual.
How to configure a canon wireless printer
- Take the printer out of its box and put it on a flat surface.
- Remove the printer’s protective tapes.
- Ensure that the protective film is removed from the printer.
- Take the printer power cable and insert it into the printer.
- Connect the alternative end of the wire to the outlet of the electric wall.
- Take a paper stack.
- Load and align the document into the printer.
- Install the printer ink cartridges.
Develop measures on how to set up the printer for Canon?
Remove the new Canon printer from the box and place it on a planar surface using the How to set up canon printer guidelines. Make sure the location is close to the wall outlet so the cable does not have to be expanded.
Remove the printer tapes. Check the inside components of the printer and inspect the protective paper on the printer’s scanner bed. When you locate a protective film on the control panel of the printer, delete it. If the printer is used together with the protective film, it can cause long-term problems with the touch control panel.
Take the printer power cable and remove it from its package. Insert one end of the printer’s power cable to the end of the printer and the other end to the outlet. You need to attach the printer energy cord straight to the wall outlet and not to other energy sources, such as UPS or surge protector.
Press the energy button on the printer control panel to enable the original setup to be completed by following instructions on the screen such as date, time and area.
Load a pile of paper and pull out the printer’s input panel. Make sure that the document is aligned with the width guides. If you do not align it, it leads to a mistake in paper jam.
Take out the packet’s fresh printer cartridge and place it in the Epson printer. Open the printer access gate and install the fresh cartridge. Make sure the cartridges are completely snapped into the location.
After completing any basic setup using How to set up a canon printer guide, download and install the appropriate printer driver that fits your printer model. The CD, supplied with a printer to install the printer driver, you may also follow the on-screen prompts on the printer to finish the driver setup. Test the configuration by printing a computer test document.